Light and ambiance is not only for indoors, by combining light and architecture in outdoor settings, the city also remains vibrant at night.
With its 7 different light effects and its multiple installation options, Frax has been designed for every aspect of the urban architecture: any form, any material or any composition.
Light and ambiance is not only for indoors, by combining light and architecture in outdoor settings, the city also remains vibrant at night.
With its 7 different light effects and its multiple installation options, Frax has been designed for every aspect of the urban architecture: any form, any material or any composition.
Frax not only cares about the perfect light effect, it takes care about the passer-by as well.
Frax can be provided with an additional honeycomb or a snoot to reduce the possebility from directly looking into the light source.
Both of them reduce any undesired lighteffect and the glare associated with it.
Frax not only cares about the perfect light effect, it takes care about the passer-by as well.
Frax can be provided with an additional honeycomb or a snoot to reduce the possebility from directly looking into the light source.
Both of them reduce any undesired lighteffect and the glare associated with it.
Anodized mounting bracket with protective sheet allows mounting on raw surfaces without damaging the luminaire.
The housing contains both the light technical and the controlling part, as it also houses the power supply. Frax S comes as an on-off luminaire, while the bigger Frax M is also available with an integrated DALI dimmable power supply. To protect the luminaire from harsh weather conditions, the in-house developed D-lock system avoids damage by overheating, overvoltage or water ingress.
Frax is based on Delta Light’s LED Caset® technology, which combines multiple LEDs with individual collimator lenses per LED to generate a clean-cut light distribution. The individual lenses create a multi-layered light distribution to generate a clean 8° or 14° beam angle. Other beam angles or other light effects are being obtained by adding microlenses in front, sculpting the light into a 26° or 47° beam angle or into a linear or wallwash effect.
Silicone seal which closes off the optical part completely and creates a watertight, IP65 luminaire.
Thermally toughened glass to withstand high demands and loads and offer additional protection and safety.
IK06 thanks to 5mm thick glass for Frax S.
IK08 thanks to 8mm thick glass for Frax M.
Apart from the extensive optical possibilities, Frax also offers a range of different mounting options. Standard, the luminaire comes on a round base, but one can also opt to install the luminaire head on a pin, on a strap or on a simplified bracket. In this way, Frax can easily be transformed to install in between the green, around a tree, a pole or any other surface. To facilitate the installation of multiple Frax luminaires, a degree scale is integrated on the hinge, perfect for precise aiming and a proper repetitive light effect.
Apart from the extensive optical possibilities, Frax also offers a range of different mounting options. Standard, the luminaire comes on a round base, but one can also opt to install the luminaire head on a pin, on a strap or on a simplified bracket. In this way, Frax can easily be transformed to install in between the green, around a tree, a pole or any other surface. To facilitate the installation of multiple Frax luminaires, a degree scale is integrated on the hinge, perfect for precise aiming and a proper repetitive light effect.
Dark Grey
Grey
Surface mounted on paved surfaces
On a pin between the green
Strapped around a tree
Mounted on a pole
Small
5,9 up to 7,9W / 650 up to 870lm
–
Medium
17,9W up to 23W / 1800 up to 2400lm
8° / 14° / 26° / 47°
–
Other effects:
linear spread / wallwash
Honeycomb
Snoot